Skip to Content
New World Motorsports
Cars
Brands
Merch
About Us
Clearance
Login Account
(0)
Cart (0)
New World Motorsports
Cars
Brands
Merch
About Us
Clearance
Login Account
(0)
Cart (0)
Cars
Brands
Merch
About Us
Clearance
Login Account
Shop Forge Motorsport Turbo Actuator for Ford Focus ST250 (2012-2018)
Turbo_Actuator_for_FORD_Focus_ST250_89081.jpeg Image 1 of
Turbo_Actuator_for_FORD_Focus_ST250_89081.jpeg

Forge Motorsport Turbo Actuator for Ford Focus ST250 (2012-2018)

£189.99

A replacement turbo actuator for the Ford Focus ST250.

Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements.

  • Choice of spring pressures to suit your car

  • Manufactured from 6026 grade aluminium

  • Vehicle specific

  • Turbo specific

  • Built to order

  • Machined and hand polished in the UK

  • Choice of piston or diaphragm operation on most actuators

  • Nomex reinforced flurosilicone diaphragms

  • Laser cut stainless steel brackets (where applicable)

  • Tuning and service kits available

  • Made in England

  • Lifetime warranty*

Please Note:

The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01327 629054. 

When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket

Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals.

Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.

In The Box:
1 x FMACST250 Actuator
1 x Forge Sticker

This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.

Spring:
Actuators:
Quantity:
Add To Cart

A replacement turbo actuator for the Ford Focus ST250.

Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements.

  • Choice of spring pressures to suit your car

  • Manufactured from 6026 grade aluminium

  • Vehicle specific

  • Turbo specific

  • Built to order

  • Machined and hand polished in the UK

  • Choice of piston or diaphragm operation on most actuators

  • Nomex reinforced flurosilicone diaphragms

  • Laser cut stainless steel brackets (where applicable)

  • Tuning and service kits available

  • Made in England

  • Lifetime warranty*

Please Note:

The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01327 629054. 

When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket

Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals.

Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.

In The Box:
1 x FMACST250 Actuator
1 x Forge Sticker

This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.

A replacement turbo actuator for the Ford Focus ST250.

Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements.

  • Choice of spring pressures to suit your car

  • Manufactured from 6026 grade aluminium

  • Vehicle specific

  • Turbo specific

  • Built to order

  • Machined and hand polished in the UK

  • Choice of piston or diaphragm operation on most actuators

  • Nomex reinforced flurosilicone diaphragms

  • Laser cut stainless steel brackets (where applicable)

  • Tuning and service kits available

  • Made in England

  • Lifetime warranty*

Please Note:

The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01327 629054. 

When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket

Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals.

Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.

In The Box:
1 x FMACST250 Actuator
1 x Forge Sticker

This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.

Frequently Brought Together

Funk Motorsport Ford Focus ST-3 Turbo Blanket Focus-RS-Turbo-Blanket-CF00007.jpeg Focus-RS-Turbo-Blanket-CF00001.jpeg FUN-001.jpeg FUN-002-2.jpeg Focus-RS-Turbo-Blanket-CF00002.jpeg Focus-RS-Turbo-Blanket-CF00003.jpeg FUN-003-2.jpeg Focus-RS-Turbo-Blanket-CF00005.jpeg Focus-RS-Turbo-Blanket-CF00006.jpeg FUN-006.jpeg FUN-005-2.jpeg FUN-004-2.jpeg Focus-RS-Turbo-Blanket-CF00004.jpeg
Funk Motorsport Ford Focus ST-3 Turbo Blanket
from £170.00
Helix Ford Focus Mk3 RS Mk4 ST Organic Clutch & Flywheel Kit
Helix Ford Focus Mk3 RS Mk4 ST Organic Clutch & Flywheel Kit
£1,299.99
BC Racing BR RA Coilovers FORD FOCUS MK3 11-18
BC Racing BR RA Coilovers FORD FOCUS MK3 11-18
£996.55
AIRTEC Motorsport Stage 3+ Induction Kit Ford Focus RS MK3 ATMSFO121_2.jpg ATMSFO121_3.jpg ATMSFO121_4.jpg FIT1 (1).jpg FIT4.jpg FIT3 (1).jpg FIT2.jpg
AIRTEC Motorsport Stage 3+ Induction Kit Ford Focus RS MK3
£545.00
Coolerworx Pro Short Shifter Ford Focus RS ST Mk3 ShortshifterFordFocusRs32_720x.jpg ShortshifterFordFocusRs33_720x.jpg ShortshifterFordFocusRs31_720x.jpg ShortshifterFordFocusRs34_720x.jpg ShortshifterFordFocusRs35_720x.jpg DSC_1333_360x.jpg DSC_1338_720x.jpg DSC_1340_720x.jpg DSC_1343_720x.jpg DSC_1345_720x.jpg
Coolerworx Pro Short Shifter Ford Focus RS ST Mk3
from £629.99

WE ARE HERE TO HELP

Home

Terms of Service

Privacy Policy

Refund Policy

Price Match

FOLLOW US

OUR REVIEWS

★★★★★

Very helpful parts arrived very quick would recommend

YOU’RE PROTECTED

Safely purchase online with 256-bit encryption

©New World Motorsports 2024 ©New World Material Handling Ltd. 2024

Turbo_Actuator_for_FORD_Focus_ST250_89081.jpeg